Prices

Metal roof cost calculator

Metal next to shingles for your home, from the prices we post in the open. Updated November 2026.

The short answer

Enter your home's size, the stories, the garage, the roof's slope, and what's on the roof now. You'll get a ballpark for metal panels and standing seam, with architectural shingles next to them, from the prices we post. Add your yearly insurance premium and the credit your agent quotes, and it shows what that credit could save you each year. It's a ballpark, not a quote. Your written price comes after a free inspection, when we measure the roof itself.

Your home

The living area on your appraisal district record or listing, like 2,100.
Stories
Garage under the same roof
How steep is the roof? Not sure? Most homes in Dallas-Fort Worth are medium.
What's on the roof now?

Your insurance credit (optional)

Ask your agent what credit their company gives for a metal roof rated Class 4 for impact. Leave these blank to skip.

How we figure it

  1. The size of your roof. Your living area divided by the stories, plus the garage, plus 10 percent for the overhangs, times a slope factor: 1.07 for a low roof, 1.16 for medium, and 1.35 for steep. It's the same math as our roof cost calculator.
  2. The price. The squares of roof, times our price per square: $995–$1,325 for standing seam, $645–$860 for exposed-fastener metal panels, and $500–$750 for architectural shingles. A square is 100 square feet of roof.
  3. The difference. We take the middle of each price range, so the gap between metal and shingles isn't stretched by the high end of one range and the low end of another.
  4. The credit. Your premium times the credit your agent quotes gives you a yearly savings. The gap divided by that savings is how many years the credit takes to cover it, if your premium and credit stay the same.

Standing seam or metal panels?

Standing seam costs more because you never see a fastener. Clips hold each panel down under its raised seam, so nothing on the surface works loose with time. That clean look is why most homeowners who choose metal choose it.

Exposed-fastener panels save money and go up faster, but every screw goes through the panel. Those screws and their rubber washers need checking as the years go by. The full side-by-side is in is a metal roof worth it?

What moves the price of a metal roof

  • Gauge. Thicker steel costs more and holds up better against dents. With gauges, the smaller number is the thicker panel, so 24 is heavier than 26 or 29.
  • Paint system. A PVDF finish, often sold as Kynar 500, costs more than a polyester finish like SMP and keeps its color longer.
  • Trim and flashing. Every valley, wall, chimney, and skylight needs trim cut to fit, and that's where most problems on a metal roof begin.
  • What comes off. Extra layers of old shingles, or wood shakes that mean a whole new deck.
  • The deck. Soft or rotten decking is replaced at $95 a sheet.
  • The shape of the roof. Steep, two-story, or cut-up roofs with lots of hips and valleys all add to the price.

Metal roofs and your insurance

A metal roof can lower your premium, but not every company gives a credit, and the amount varies. Texas insurers can give a credit for roofing tested for impact and rated Class 1 through Class 4, and Class 4 gets the most. Before you buy, ask your agent three things:

  • How much credit will you give? That's the number for the calculator above.
  • Does the credit come with a cosmetic damage exclusion? Hail can dent metal without making it leak. With that exclusion, your policy won't pay to fix dents that only change how the roof looks.
  • What proof do you need? When we install a roof rated for impact, we fill out and sign the state's Impact-Resistant Roofing Installation Form (PC068). You keep the original and send a copy to your insurance company.

Insurance companies can change terms when your policy renews, so check your roof coverage every year.

Got a letter from your insurance company about a cedar or wood shake roof? Read your options when insurance drops a wood roof.

Paying for the roof yourself? Metal roofs are part of the KOG Straight Deal: your first year of the Roof Care Plan free, and a labor warranty that keeps going up to 10 years.

Common questions

How much does a metal roof cost in Dallas-Fort Worth?

At our posted prices, exposed-fastener metal panels run $645 to $860 a square, and standing seam runs $995 to $1,325 a square. A square is 100 square feet of roof. For a one-story, 2,000-square-foot home with a 2-car garage and a medium roof, that's roughly $20,600 to $27,500 for panels and $31,800 to $42,400 for standing seam, before extras.

Is a metal roof worth the extra cost?

Often, if you'll keep the home a long time. A well-installed metal roof can last 40 years or more, it doesn't burn, and if it's rated for impact it can earn a premium credit. Weigh that against the higher price up front, and ask your agent how your policy handles cosmetic hail damage on metal.

Can a metal roof go over my old shingles?

Some metal systems can go over one layer of shingles where the code allows, which saves the cost of the tear-off. A tear-off costs more, but it lets us see and fix the deck before it's covered for decades. If the roof has soft spots, it comes off. The prices in this calculator include the tear-off.

Is this a quote?

No. It's a ballpark from our posted prices. Odd-shaped roofs, big porches, and very steep pitches throw it off, so your written price comes after we measure the roof itself.

Get your exact price

The inspection is free. We measure the roof, go over panel type, gauge, and color with you, and give you a written price with photos of what we found.

Roof guides