Services

Metal roofing in Dallas-Fort Worth

New metal roofs and metal roof repair for homes, shops, and commercial buildings

The short answer

We install standing seam and exposed-fastener metal roofs, and we repair metal roofs other companies put on. Most metal roof leaks come from the screws, the trim, and the flashing, not the panels, so that's where we look first.

Why KOG went to metal

We installed asphalt shingles for years. Then we went back and looked at roofs we'd put on years earlier, and we didn't like how they'd held up to the Texas sun and hail. That's what turned KOG toward metal. A well-installed metal roof can last 40 years or more. Over that time, you might replace a shingle roof once or twice.

What we recommend

  • Paying for the roof yourself? Look at metal first. At our prices, exposed-fastener panels cost about 15 to 30 percent more than architectural shingles, and standing seam close to twice as much, for a roof that can last 40 years or more. See what it comes to for your home with the metal roof cost calculator.
  • Shops, barns, and commercial buildings: metal, almost every time. Exposed-fastener panels go on fast over purlins or a solid deck, and standing seam suits offices and churches that want a cleaner look.
  • Insurance paying for a shingle roof? Upgrade to Class 4 shingles. Impact-resistant shingles rated Class 4 take harder hail and can lower your premium. A claim usually pays to replace what you had, so if you choose Class 4, you pay the difference yourself, and it's spelled out in your contract.

The Texas insurance credit for impact-resistant roofs

Texas insurers can give a premium credit for roofing that's been tested for impact under UL 2218 and rated Class 1 through Class 4. Class 4 gets the highest credit. Each insurance company sets its own amount and its own paperwork, and the Texas Windstorm Insurance Association gives credits too.

The proof is a Texas Department of Insurance form, the Impact-Resistant Roofing Installation Form (PC068). When we install a rated roof, we fill it out and sign it, and you get the original and a copy of the product label. Keep the original, and send a copy to your insurance company.

Many metal panels carry a Class 4 rating too. For the Windstorm Association's credit, the rating has to be printed on the product label. Before you buy, ask your agent two things: how much credit their company gives, and whether the policy has a cosmetic damage exclusion. Some companies pair the two.

Where metal makes sense

  • Homes. Standing seam, with hidden fasteners and clean lines, for owners who want a roof they won't think about again for a long time.
  • Shops, barns, and garages. Exposed-fastener panels go on fast over purlins or a solid deck and cost less than standing seam.
  • Metal buildings and warehouses. Panel roofs on pre-engineered buildings, where the roof is part of the building's design.
  • Offices, churches, and storefronts. Standing seam on the sloped sections, often next to a flat roof on the rest of the building. We do both. See commercial roofing.

Weighing metal against shingles? Read Is a metal roof worth it? for the trade-offs.

How a new metal roof goes

  1. Measure and choose. We measure the roof and go over panel type, gauge, and color with you. Metal panels are ordered cut to length for your roof, so the numbers have to be right the first time.
  2. Get approvals. If you're in an HOA or a historic district, switching to metal or changing color may need approval first. We give you the product name, color, and spec sheet for the request.
  3. Prep the deck. Tear-off where it's needed, decking repairs, and new underlayment.
  4. Trim and flashing. Eave trim, rake trim, valleys, and wall flashing go on in the right order so each piece sheds water over the one below it.
  5. Panels. Installed square and fastened to the manufacturer's pattern.
  6. Penetrations and ridge. Pipe flashings sized to each pipe, then the ridge cap with closures that keep out water, wind-driven rain, and wasps.
  7. Final walk. We check every screw line and every piece of trim, clean up the metal shavings, and give you photos of the finished roof.

Metal roof repair

Older exposed-fastener roofs on shops and warehouses often start leaking at the screws long before the panels wear out. Common problems and fixes:

  • Backed-out screws and dried-out washers. Panels grow and shrink with the heat every day, and that works the screws loose. We replace them with new screws, sized up where the old holes have wallowed out.
  • Leaks at panel laps. Where one panel overlaps the next, failed sealant lets water wick in. We clean and reseal the laps.
  • Trim and flashing. Loose or missing ridge cap, gable trim, and wall flashing, often after high wind.
  • Pipe and vent flashings. The rubber boots around pipes dry out and crack in the sun, just like on a shingle roof.
  • Skylight panels. Clear panels on shops and barns get brittle and crack. We replace them to match the rib profile.
  • Rust. Surface rust at cut edges and screw holes can be treated if it's caught early. Rust that's eaten through the panel means that panel gets replaced.

Common questions

Can you match the panels on my building?

Usually. Panel profiles vary by manufacturer, so we measure the rib spacing and height and find a match. Color is harder: new paint won't match panels that have faded for years.

Does a metal roof attract lightning?

No. A metal roof doesn't make a lightning strike more likely.

Will hail ruin a metal roof?

Large hail can dent metal, but dents usually don't make it leak. Before you buy, ask your insurance agent how your policy handles cosmetic damage to a metal roof.

Will a metal roof lower my insurance?

It can, if it's rated for impact. Texas insurers can give a premium credit for roofing rated under the UL 2218 impact test, and Class 4 gets the most. Each company sets its own amount, so ask your agent. See the Texas insurance credit above.

Do you work on metal roofs you didn't install?

Yes. Most of the metal roof repairs we do are on roofs someone else put on.

Where this comes from

Paying for it yourself?

Metal roofs are part of the KOG Straight Deal: your first year of the Roof Care Plan free, a labor warranty that keeps going up to 10 years, no surprise bills, and the install paperwork your insurance company asks for on an impact-resistant roof.

Thinking about metal, or got a metal roof that leaks?

Call and tell us about the building. We'll come look and give you a straight answer and a written price.

Roof guides